Nano Technology

Nano Technology is the process by which fuel molecules are conditioned to split and align, allowing for a much more efficient and cleaner burn during combustion. 

EPS Nano Technology is a unique process that takes normal fuel molecules (usually 300 nanometers or larger) and breaks them down into much smaller fuel molecules (usually 3 nanometers or less). 

When the process of EPS Nano Technology is used in the engine, fuel efficiency is increased, pollution is reduced, and engine power is improved. EPS Nano Technology can be used on a wide range of applications - gas, diesel, kerosene, natural gas, and various heating oils. 

Because Nano Technology uses the flow of fuel to breakdown fuel molecules, it is important to know which EPS series is correct for your specific application. 

Currently, at Solution Hybrid we offer two series of EPS Nano units, the EPS Series and the EPS-L Series (see pictures below).   Before deciding which Nano EPS unit you would like to purchase, it is important to know the fuel flow rate of your specific application. This is crucial to the overall performance of this product and your satisfaction. As a rough indication, the EPS 1 seems to work best up to midsize engines - 6 Cylinder aprox 3L. For big V6, V8, V10 and ALL Diesel Engines we recommend the bigger Units = EPS 2. 

• Fuel efficiency improvement of 10% - 25% (varies each application).
• Emission reduction of CO, HC, NOx of 25% or greater.
• A 30% - 90% reduction in particulate matter (varies each application).
• Engine power enhancement 5% - 25% (varies each application).
• A 10% reduction of CO₂

The EPS Series (black in photo):

EPS-1/EPS-2:

The EPS-1 is designed for a fuel flow capacity of 1/2 - 11 gallons per hour.  The EPS-2 is designed to fit applications with a fuel flow capacity of 7-22 gallons per hour.

The EPS-1 unit will work well on automobiles, pickup trucks, SUV's, small boats, construction and agriculture equipment, generators, mobile equipment, and small machinery.  

The EPS-2 will work well with class 2-6 trucks, transit buses, school buses, and off road vehicles. 

All of our units come with standard fuel line fittings; however, we always suggest that upon ordering any of our devices you let us know specifically what application it will be installed on. This will allow us to better assist you on the proper fittings for your application. 

*Retail Pricing:

EPS-1:              $325.00

EPS-2:                $595.00

*Fitting prices not included.

*Contact Us for specific vehicle requirements

The EPS-L Series (orange in photo):

This product was designed to allow 40 liters (11 gallons) to 720 liters (192 gallons) of fuel flow per hour.

This unit will work well on large industrial applications, large power generators, marine vessels, heavy equipment, and locomotives. 

Again, we recommend that all customers provide their specific applications when ordering EPS devices to insure the proper fuel line fittings are included. 

*Retail Pricing

EPS-L120        $1,295.00
EPS-L240        $2,495.00